A good seal is important when choosing a mold vacuum. The seal is coupled with a solid HEPA filter, which prevents nearly all potential particles from escaping. Find out which is the best mold removal HEPA vacuum here.
In order to ensure your mold is removed correctly, you need to relate your vacuum shopping experience to the quality of the vacuum. It is possible to get a solid vacuum for removing mold when these two factors are present.
Here are the eight best vacuums for mold remediation if you think you might need one.
Best Selling HEPA Vacuum For Mold
[amazon bestseller=”best HEPA vacuum for mold”]
Top Rated vacuum for mold
Shark’s NV352 Navigator is an excellent mold remover and containrer. With the anti-allergen complete seal technology and HEPA filter trap the device is anti-allergen.
The Navigator’s suction power is consistent, but its maneuverability has been compromised by its power cord. This is important since the Navigator advertises itself as a portable vacuum cleaner that is lightweight (16 pounds).
Furthermore, this vacuum cleaner comes with an upholstery tool and two different crevice tools. This makes it easier to reach difficult areas.
This lift-away feature is due to your ability to carry the vacuum container and motor. This vacuum is flexible and efficient, which makes it ideal for cleaning stairs.
I ranked this model second because it comes with a canister. It is not see-through, so you cannot tell when it is full simply by looking at it.
It will also have the same seal technology as a HEPA vacuum. The vacuum will also weigh about the same as other chrome-colored vacuums. Attachments such as a pet grooming kit, an upholstery tool, and a crevice tool are included. You can already buy something for grooming pets, so you don’t need the pet tool. You can also use this vacuum to remove pet hair from carpets and rugs.
Shark’s products are also known for their powerful suction. The biggest problem is that their warranty is confusing. This upright vacuum is still capable of removing mold particles.
Also Read: Best vacuum for hard wood floor
There is a bagged design on the Miele Complete C3 Marin HEPA Canister Vacuum Cleaner, which is better at containing dust than the two top Shark vacuums. Despite the fact that the bagged vacuum has a greater impact on waste, it costs much more to use and is less environmentally friendly.
While this vacuum cleaner requires a high upfront investment, it lasts up to twenty years. This one, however, has a significant issue with the head going out, even though the warranty says otherwise. Fortunately, warranty issues have been addressed, and improvements have been made.
You can expect it to be heavy because it is a canister vacuum.
This sealable bag is made up of multiple layers of protection, including HEPA filters. When taken care of properly, this can be a lifetime vacuum with its high capacity and numerous replacement bags. The system even includes four pre-motor protection filters, making this a comprehensive system.
This machine has a three-stage HEPA cleaning and filtration system that allows it to clean any surface while trapping even the smallest micro bacteria and mold spores. The iRobot Roomba 880 Robotic Vacuum Cleaner is programmed with the Dirt Detect Series 2 Technology, so it will find the dirtiest areas of your house and spend more time cleaning them.
Unlike other vacuum cleaners, this machine is not only automated, meaning it can operate without human intervention, but it also uses advanced technology. The machine cannot crash into walls or fall down stairs.
allergens will never be released into your home. if you suffer from asthma or allergies. This canister vacuum is designed to be used on a variety of floors, from carpet to tile to hardwood.
This vacuum cleaner only weighs 15 pounds, making it one of the lightest HEPA vacuum cleaners currently available on the market, making it an ideal choice for people with back problems.
There is no vacuum cleaner with a stronger suction than this futuristic looking mold vacuum cleaner. The carpet- and hardwood-cleaning heads change automatically depending on whether they are cleaning hardwood floors or carpets. Dyson Ball Animal 2 Upright Vacuum Cleaner also features a hygienic bin emptying feature that allows dirt captured by the vacuum to be released at the touch of a button
them from returning to your home. The vacuum has a motorized brush to help remove pet hair.
Vacmaster Industrial Wet/Dry Vacuum (VK811PH) has a certified HEPA filtration system that is 99.97% efficient as well as a HEPA exhaust filter that prevents allergens like mold spores from returning into your home. Having a capacity of 8 gallons, it is an excellent industrial vacuum cleaner. The canister also requires less cleaning because you don’t need to clean it as regularly.
A fine dust collection bag is included with this vacuum cleaner to prevent even the smallest dust particles from returning to the air. The vacuum cleaner also features ball bearing caster wheels for easy mobility.
This bagless canister vacuum can capture 99.97% of microparticles, including mold spores, due to its powerful filtration system. It also comes with a great wand attachment that is useful when cleaning ceilings and curtains. The vacuum cleaner also comes with a telescopic wand that is adjustable according to your needs.
You can easily empty the contents of the dirt bin into the garbage thanks to its see-through design. As a result, you can also easily see when it’s time to empty the trash thanks to this transparent design.
WHAT SHOULD I LOOK FOR IN MOLD REMEDIATION VACUUM CLEANERS?
WHAT IS A HEPA VACUUM?
HEPA stands for High-Efficiency Particulate Air. The vacuum itself might not be designed or operate much differently than a standard non-HEPA vacuum, but what sets it apart is the filter it uses.
IS A HEPA VACUUM NECESSARY FOR MOLD?
The vast majority of mold spores pass through filtration, out the exhaust, and then back into the air when you vacuum with a non-HEPA vacuum cleaner. They are too small to be captured by ordinary filters. There may be a few exceptions, such as mold spores that adhere to dust and are filtered out that way. The use of non-HEPA vacuums is risky since it is likely to disperse even more mold spores into the air as well as the risk of them finding food after they land. The reason you should never vacuum over mold growth with a non-HEPA vacuum is because mold will grow over time.
Although a HEPA vacuum can remove many mold spores from carpet, you won’t be able to completely eliminate all of them. However, under the microscope, lab tests have shown that HEPA vacuuming significantly reduces the amount of microscopic particles in carpet.
HOW DO I KNOW IF MY VACUUM IS GOOD FOR VACUUMING MOLD?
You need a high-quality HEPA filter to ensure your vacuum meets the minimum standard. A 0.3 micron or smaller particle is captured by HEPA, which stands for High-Efficiency Particulate Air.
Mold particles that are in the air are captured by microscopic airborne particles called microns.An air purifier has a similar function; the difference is that a vacuum is pushing small particles through
The MERV rating of a high-quality HEPA vacuum cleaner (and other air purifiers) is determined by experts. The Minimum Efficiency Reporting Values (MERVs) measure the ability of filters to capture small particles.
IS A POWERFUL MOTOR GOING TO HELP REMOVE MOLD?
The air wattage recommended by Hoover for an effective vacuum is 100. However, if you want a vacuum to remove mold, it must be able to produce at least 220 air watts.
In light of this, all of the vacuums on this list meet or exceed those specifications. Those that boast higher air wattage might have more excellent suction, but this is only one part of the big picture.
CFM (Cubic Feet Per Minute) is a measure of airflow. A higher CFM is a factor of Airwatts, along with a higher water lift rating measured in inches of water.
An ideal combination of both would be 50 CFM at 40 inches of water. This is an average air wattage of 235.
For vacuums of this size, we would expect this number to be higher. However, among those larger numbers, the CMFs and water lift ratings need to be balanced.
Additionally, a vacuum’s natural sealing capabilities contribute to this.
A GUIDE TO ENSURE A GOOD SEAL ON A VACUUM
There are a number of factors that go into finding a vacuum that has a good seal. However, much of it comes from the personal use of a vacuum.
Vacuum cleaners are well known for their effectiveness. No air is blown out, and no loose bags allow dust to flow.
It consists of a sealed HEPA filter combined with a bag for ultimate dust protection.
If you want to remain even more protected, wear a dust mask while vacuuming. Allergies to dust can be doubly problematic. You should regularly vacuum, use air purifiers, and dust your home.
Be sure your vacuum has a good seal if you are cleaning mold.
A TIP FOR LONGEVITING YOUR HEPA FILTERS
HEPA filters can usually be cleaned. There are several products on the market that are referred to as disposable HEPA filters. HEPA filters are thick and able to catch numerous particles.
There are two types of disposable HEPA filters: thin and thick. Despite the fact that they can be added to bags, you may want to reconsider those purchases.
Even when you’re not cleaning mold, you should always wear a mask.
HOW COME THIS LIST DOESN’T CONTAIN MORE STICK VACUUMS?
Stick vacuums simply aren’t designed to remove mold. A multi-level filtration tool such as Tineco is an exception because it is of high quality. Yet, it does not top the list of recommended items.
It will be better if you do not usually use stick vacuums for cleaning spores. Light-duty vacuums are more suitable for stick vacuums.
CAN A VACUUM THAT WAS USED TO REMOVE MOLD SPORES BE REPLACED?
I think that would be a horrible waste of money. It is best to use vacuums that are bagged, so as to reduce the possibility of exposure. If you are using a bagless vacuum, make sure that you thoroughly clean the vacuum before using it again. Clean the HEPA filter with water and make sure there are no specks remaining. Before moving on, let the HEPA filter dry.
WHAT IS THE BEST BUDGET TO SET FOR MOLD CLEANING VACUUMS?
It’s ideal to have a budget that’s above $100. Some of these vacuums can be found for less than $100, but are unlikely to be effective. Ovente’s ST2010 canister vacuum is a good example of a canister vacuum that is effective at removing mold. HEPA vacuums for mold are not considered to have this feature.